Epson Stylus NX200
Designed to offer both functionality and convenience, the Epson Stylus NX200 can print brilliant color photos without the use of a PC. That’s right, it comes with built-in memory card slots and offers PictBridge support, so you can print those precious photos even while on the go. But it’s reliable in printing, copying, and scanning text documents and photos too. It can print at speeds of up to 32 ppm both in color and black and white, so it sure helps improve productivity. Got one for your home or office? Then, equip it only with high-quality replacement ink cartridges when it starts running low on ink. Inkjets offers affordable remanufactured Epson ink cartridges that are designed to meet or even exceed OE standards. Purchase our remanufactured Epson 68 and 69 ink cartridges here today!
How to Replace Epson Stylus NX200 Ink Cartridge
Use this Epson Stylus NX200 ink cartridge installation guide below so you can easily and immediately use your remanufactured Inkjets cartridge. Your printer will let you know if the ink cartridge is low or empty. For low cartridge, it will prompt the ink light to flash. The lamp will only stay on if the cartridge is already expended.
- 1. Lift up your machine‚ôs scanner.
- 2. From the printer navigation area, press the Stop button. This will yield to the printer head moving to the no ink position. This location will align to which ink cartridge color is expended.
- 3. You should then proceed with pressing the Stop button again. Proceed to the next step only if the printer head is at the far right of the printer.
- 4. Lift and then pull towards you to open its cartridge cover.
- 5. Each cartridge has its own tab. You will have to squeeze it in order to release the empty cartridge from its slot. While squeezing the tab, make sure to lift up the cartridge.
- 6. Get your ink cartridge and slide it in the slot. You will only be able to secure it in position if you push it down.
- 7. After installing the new ink cartridge, make sure to close the cartridge cover and the scanner unit.
- 8. Before you can print, your printer will need to charge the ink. Press the stop button and wait for 2 minutes. You will know if it is completed if the printer‚ôs screen will show a completion message.